Skip to content
580423
With a quick switch of the guide bar, chain, and drive sprocket, you can use this power cutter in masonry, stone, and even reinforced concrete.
The 680ES-PG may be the most cost-effective, versatile tool in your arsenal.
WARNING:
This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
680ES Powerhead only MSRP $1469
680ES Saw packages start at MSRP $2144
Ics 680Es-10 Pg Gas Power Cutter Pkg, With 10 In/25 Cm Guidebar & Powergrit Chain #580423
580423ICS
Regular price $2,444.47
Shipping calculated at checkout. PLEASE NOTE: Some large/heavy or bulky items(Excludes Diamonds & Accessories) require LTL Truck Shipping & may require a quote for additional freight charges prior to shipping.
ICS 680ES-10 PG Gas Power Cutter Pkg, with 10 in/25 cm Guidebar & PowerGrit Chain
Description
Built to provide a combination of performance and portability for cutting in-ground utility pipe, the 680ES-PG Gas Power Cutter with PowerGrit® chain will change the way you cut pipe.
The 680ES PG allows you to cut up to 10 in. deep into ductile iron, cast iron, PVC, HDPE, and Insituform lining, and is also designed to fit the full line of FORCE3® Series chains.
The 680ES PG allows you to cut up to 10 in. deep into ductile iron, cast iron, PVC, HDPE, and Insituform lining, and is also designed to fit the full line of FORCE3® Series chains.
With a quick switch of the guide bar, chain, and drive sprocket, you can use this power cutter in masonry, stone, and even reinforced concrete.
The 680ES-PG may be the most cost-effective, versatile tool in your arsenal.
WARNING:
This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
680ES Powerhead only MSRP $1469
680ES Saw packages start at MSRP $2144
FEATURES AND BENEFITS
- Polyester air filter designed specifically for wet cutting
- Operates PowerGrit Pipe Cutting saw chain
- Multifunction lever controls choke, throttle advance, run and stop modes
- Extended drive sprocket adapter offers easy chain assembly
- Deep cutting solution for obstructed or small openings
- Easy-to-start in all weather
Featured Videos
695 Air Filter and Spark Plug
Replacing these two inexpensive items regularly can extend the life of your saw. Click below for instructions
695 and 890 Post Use Recommendations
You’re done for the day, we show you how put your tools away clean and ready for tomorrow
695 Daily Inspection
How to inspect the 695 daily to get the best life out of your saw
| Engine Type | 2-stroke, Air Cooled |
| Displacement | 76.5 cc (4.7 cu-in) |
| Horsepower | 3.7 kW (5 hp) @ 9,500 rpm |
| Torque | 4.1 Nm (36.3 in-lbs) @ 6,500 rpm |
| Engine Speed | 11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle) |
| Chain Speed at Maximum Power | 34.5 m/s (6800 ft /min) |
| Weight | 9.5 kg (21 lbs) powerhead only |
| Dimensions | 46 cm (18 in) length / 29 cm (11.5 in) height / 25 cm (10 in) width |
| Starter | Dust and water resistant |
| Ignition | Special water resistant electronic ignition |
| Fuel ratio | 4% (25:1) gasoline-to-oil |
| Fuel Capacity | 0.88 liter (0.23 gallon) |
| Water Supply Requirement | Minimum: 1.5 bar (20 psi) |
| Water Flow Requirement | Minimum: 4 lpm (1 gpm) |
| Guaranteed Sound Power Level, Lwa (1) | 117 dB(A) (Kwa=3.0 dB(A)) |
| Equivalent Sound Pressure at the Operator's Ear Lwa | 101.0 dB(A) (K = 2.0 dB(A)) |
| Vibration, ahv eq Concrete Cutting (2) | 7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle |
1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010 / (2) Measured in accordance with ISO5349=1:2001 and IS 22867:2011